How to Clean Barbour Waxed Jacket

Do you own a Barbour waxed jacket and want to keep it looking its best? Have you ever wanted to support your favorite Barbour waxed jacket, looking clean and fresh all year round? With the proper care, your Barbour waxed jacket will stay stylish for years. In this blog post, we’ll take you through how to clean a Barbour waxed jacket so that it looks like new! 

How to Clean Barbour Waxed Jacket

We’ll show you what cleaning products are safe to use on these jackets and provide step-by-step instructions on how to clean Barbour waxed jacket and how to get the job done. By the end of our guide, you should be all set when it comes time to take on any little messes with your precious Barbour!

Necessary Items

Before diving into how to clean your Barbour waxed jacket, you’ll need to have a few items on hand. These include:

  • Soft-bristled brush
  • Mild soap or special Barbour cleaner
  • Sponge
  • Warm water
  • Cloth/towel for drying

10 Steps on How to Clean Barbour Waxed Jacket

Step 1: Brush Off Any Dirt/debris

Before starting to clean your jacket, it’s important to brush off any loose dirt or debris. Use a soft-bristled brush to remove any surface-level dirt from the waxed fabric gently. This will help prevent the dirt from spreading and getting embedded more deeply into the fabric during the cleaning process.

Step 2: Remove Any Stains

If your jacket has any noticeable stains, it’s best to try and remove them before moving on to the overall cleaning. Use a mild soap or special Barbour cleaner (recommended by Barbour) and gently rub it onto the stained area with a sponge. Let it sit for a few minutes, then wipe off with a damp cloth.

Use a Mild Soap

Step 3: Prepare Your Cleaning Solution

Mix warm water, mild soap, or Barbour cleaner in a bucket or sink until you have suds. Avoid using hot water, as this can damage the wax coating on your jacket.

Step 4: Dip and Rinse

Dip your jacket into the cleaning solution and leave it to soak for a few minutes. This will help loosen any dirt or stains embedded in the fabric.

Step 5: Wash Gently

Using your sponge, gently go over the entire surface of your jacket with the cleaning solution. Avoid scrubbing too hard, as this can also damage the wax coating. Pay special attention to any areas with stubborn stains.

Step 6: Rinse Thoroughly

Once you’ve finished washing the jacket, rinse it thoroughly with clean water. This will help remove all traces of soap or cleaner from the fabric.

Step 7: Dry Gently

Using a clean towel or cloth, pat your jacket dry. Avoid wringing or twisting the fabric, which can damage the wax coating.

Step 8: Re-Wax If Necessary

If your jacket is starting to lose its wax coating and become less waterproof, now is an excellent time to re-wax it using a Barbour Thornproof Dressing or Wax Cotton Dressing. Follow the instructions on the product carefully.

Step 9: Hang to Dry

Hang your jacket in a well-ventilated area until it is scorched. Do not use heat sources to speed up the drying process, which can damage the wax coating.

Step 10: Store Properly

Once your Barbour waxed jacket is clean and dry, store it properly to prevent any damage. Hang it in a cool, dry place and avoid packing or folding it tightly.

Cleaning your Barbour waxed jacket is a simple process that can help keep it looking stylish and protect its longevity. Remember always to use mild products and avoid harsh scrubbing or hot water.

With these tips, you can maintain your favorite Barbour piece for years!  So follow these steps and get ready to rock that clean and fresh Barbour waxed jacket look all year round!  Keep your style game on point and take good care of your Barbour; it will never disappoint you.

 Take Good Care of Your Barbour

8 Additional Tips for Keeping Your Barbour Waxed Jacket Clean

1. Avoid Machine Washing or Dry Cleaning

Barbour recommends against using a washing machine or dry cleaning to clean your waxed jacket, as this can strip the wax coating and cause damage. Hand washing is the best method for cleaning Barbour waxed jackets.

2. Use Mild Soap or Special Cleaner

It’s essential to use a mild soap or special cleaner recommended by Barbour when cleaning your jacket. Harsh chemicals can damage the wax coating and affect its waterproofing abilities.

3. Don’t Overclean

It’s not necessary to clean your Barbour waxed jacket after every wear. Overcleaning can cause the wax coating to deteriorate faster. Only wash it when it looks visibly dirty or loses its waterproofing abilities.

4. Spot Clean for Minor Stains

For minor stains, spot cleaning with a damp cloth and mild soap is usually enough to remove them without washing the entire jacket.

5. Store in a Cool, Dry Place

Store your jacket in a cool, dry place when not wearing it. Avoid storing it in direct sunlight or near heat sources, as this can damage the wax coating.

6. Use a Garment Bag When Traveling

If you plan on traveling with your Barbour waxed jacket, use a garment bag to protect it from any dirt or debris that may accumulate during transit.

7. Avoid Wrinkling the Fabric

Wrinkles can cause cracks in the wax coating, so try to avoid folding or packing your jacket too tightly. If it becomes wrinkled, hang it in a warm room to help the wax coating melt and smooth over any creases.

8. Re-Wax As Needed

Depending on how often you wear your jacket, you may need to re-wax it every few years. Keep an eye out for when the waterproofing begins to fade, and take the time to re-wax your jacket to keep it looking its best.

Following these ten steps and additional tips, you can easily clean and maintain your Barbour waxed jacket to stay stylish for years. Remember to use the recommended cleaning products, avoid harsh chemicals and heat sources, and store your jacket correctly to prevent any damage to the wax coating.

Avoid Harsh Chemicals

With some care and maintenance, your Barbour jacket will continue to protect you from the elements while also looking great.

Frequently Asked Question

Can I Use Regular Laundry Detergent to Clean My Barbour Jacket?

No, it is not recommended, as the harsh chemicals in regular laundry detergent can damage the wax coating on your jacket. It’s best to use a mild soap or special cleaner Barbour recommends.

How Often Should I Re-Wax My Jacket?

It depends on how often you wear your jacket, but on average, Barbour recommends re-waxing every 2-3 years. Watch when the waterproofing starts to fade, and take the time to re-wax it as needed.

Can I Put My Barbour Jacket in the Dryer?

No, it is not recommended, as the heat from the dryer can damage the wax coating on your jacket. It’s best to hang it up to dry in a well-ventilated area. 

Can I Iron My Barbour Jacket?

No, it is not recommended, as the heat from the iron can damage the wax coating on your jacket. If your jacket becomes wrinkled, hang it in a warm room to allow the wax coating to melt and smooth out any creases.

How Do I Spot Clean My Jacket?

To spot minor stains on your Barbour jacket, gently rub the affected area with a damp cloth and mild soap. Rinse with clean water and pat dry with a towel. Avoid scrubbing too hard, as this can damage the wax coating.  Overall, it’s essential to be gentle when spot-cleaning your jacket.

What Should I Do If My Jacket Gets Wet?

If your Barbour waxed jacket gets wet, hang it to dry in a well-ventilated area. Do not use heat sources to speed up the drying process, which can damage the wax coating. Once dry, it’s recommended to re-wax your jacket to ensure maximum waterproofing abilities. 

Gently Rub the Affected Area

Overall, prevention is key – try to avoid wearing your waxed jacket in heavy rain or downpours.  Properly caring for your Barbour waxed jacket will continue to look great and keep you dry for years to come.

Conclusion

Barbour waxed jackets are timeless and versatile pieces of outerwear that require proper care and maintenance to ensure longevity. By following the steps and tips on how to clean Barbour waxed jacket outlined in this guide, you can easily clean and maintain your jacket to keep it looking stylish while also protecting you from the elements. 

Use mild soap or special cleaner, avoid harsh chemicals and heat sources, store your jacket correctly, and re-wax as needed.  With some extra care, your Barbour waxed jacket will remain a staple in your wardrobe for years.  So enjoy the great outdoors, knowing you have a trusted and reliable companion in your Barbour jacket.

Photo of author

Matt Clark

Hi, this is Matt, and I am a leathercraft hobbyist. I have been working with leather for quite a bit of time. When I was a teenager, my father taught me the basics of leathercraft. Along the way I have learned a lot of things about leather work leather items, restoring leather, and creating leather accessories. I started this blog to share my knowledge of leatherworking with others and help people learn about this amazing craft. I also wanted to create a community of like-minded people who could share ideas and support each other in their leatherworking journey.

Leave a Comment